Water Filter Manufacturer in China for OEM & Private Label
Jinko’s range covers faucet, shower, inline pre-filter, reverse osmosis, 2-in-1 faucet and foam rinse, and pump-connected water filters. Use the category pages to compare where each product is installed and how it may fit your project. For an OEM or private-label enquiry, share the model direction, market, document requirements, packaging brief, quantity, and target date.
HOME / Product
Explore Jinko’s Water Filter Product Range
Start with the installation point and the water problem the project needs to address. Each section keeps the product details beside its category page and enquiry route. Ask for the current specification, media or cartridge information, installation details, and applicable test documents for the model you are considering. Where a performance figure or certification matters to the purchase, ask Jinko to identify the exact model and provide the current document for review. Do not apply one model’s specification or test result to another product.
OEM Faucet Water Filter Manufacturer in China
Faucet-mounted filters may be used in kitchen or bathroom settings, depending on the model and connection. Compare the faucet type, connector, cartridge or media, intended use, flow requirement, and replacement plan. Those details help Jinko identify whether a current model matches the installation rather than assuming one connection fits every faucet.
For OEM and private-label enquiries, include the model direction, brand presentation, packaging scope, target market, quantity, and document requirements. Jinko can review that brief before confirming which options apply.
OEM/ODM discussion
Brand, packaging, and model requirements are reviewed together.
Order timing
Sample availability and production timing are confirmed after the model and quantity are known.
Model documentation
Ask for the specification and test documents that apply to the faucet filter under review.
OEM and private-label options
Project timing checked
Model specifications reviewed
Shower Filter for Skin & Hair Care
Shower-filter projects often begin with the connection, cartridge, and market positioning. Review the main shower-filter range and the hand-held shower filter series, then provide the target water issue, packaging direction, and required documents for the model being considered.
If the project calls for vitamin or specialty media, request the model-specific media information. Connection and replacement requirements also need to be checked against the intended market and installation setting. The model file, connection, and intended market determine the applicable product information.
Connection and cartridge review
Check the connection, media, replacement approach, and intended shower setting for the selected model.
Media and test documents
Request the documents that match the cartridge or media configuration being quoted.
Brief for personal-care projects
Share the market, packaging direction, quantity, and product positioning with the enquiry.
Multifunction Inline Pre-Filter for Household & Appliance Protection
An inline pre-filter may sit near an under-sink unit, water heater, toilet, or washing machine. Its connection and operating conditions still need to match the installation. Provide the port size, placement, cartridge or media, replacement plan, rated flow requirement, and the sediment or rust issue the project is trying to manage.
For an OEM or private-label request, add the market, packaging direction, quantity, and required documents. The applicable installation information and product file can then be checked before a configuration is approved.
Installation review
Check the connection, position, and operating conditions for the appliance or household setting.
Filtration information by model
Ask for the media, rated flow, replacement, and test information that applies to the pre-filter under review.
Project brief
Include the application, packaging direction, quantity, and document requirements with the quotation request.
Reverse Osmosis System for Clean, Reliable Drinking Water
The reverse osmosis category page shows tankless, tank, and countertop formats. The membrane, filtration stages, rated flow, installation, power, and maintenance plan vary by model. Source-water information and required testing documents should be included when a system is selected.
Suitability for a drinking-water application depends on the configuration, source water, intended use, and requirements in the target market. Request the model-specific technical file before making a performance or compliance decision. An OEM enquiry should also identify the preferred format, quantity, packaging, and document needs.
2-in-1 Faucet Water Filter & Foam Rinse Cleaner
This product combines faucet filtration with a foam-rinse function in one unit. A useful enquiry describes the faucet connection, water path, foam function, cleaning use, replacement requirements, and the test information needed for the market. It should also state the intended application and whether the buyer needs a particular brand or packaging direction.
Plumbing requirements and drinking-water use must be checked in the documentation for the version being quoted. Add the faucet type, market, order quantity, packaging scope, and target date so the commercial review is tied to the same model.
Faucet filtration and foam rinse
Review the two functions and the connection requirements for the selected version.
Kitchen use
Describe the cleaning setting and expected water path so Jinko can match the model to the project.
Private-label review
Include branding, packaging, quantity, and document needs with the quotation request.
Portable Water Pump Filter for Buckets, Tanks & Outdoor Use
Clean Water Where It’s Needed Most
This category connects a filter to a dispenser, bucket, tank, or external pump. Source-water conditions and intended use must be reviewed before a pump-connected filter is chosen. When a project involves untreated water, ask for model-specific filtration data, installation details, maintenance requirements, and test documents.
State the connector, power condition, source water, intended use, packaging direction, quantity, destination, and target date in the enquiry. Jinko can check the project against the current model after reviewing the source water, intended use, and supporting documents.
Pump and dispenser projects
Check the pump, tank, bucket, or dispenser connection and the intended operating setting.
Source-water review
Share the source-water condition and intended use before requesting filtration or test information.
Order and document brief
Include quantity, destination, packaging, maintenance, and timing requirements in the enquiry.
Project Support for OEM Buyers
- Product and packaging options reviewed by model
- Sample and specification requests handled per project
- Required documents confirmed for the selected model and market
